Bitcoin Forum
July 21, 2018, 06:36:28 PM *
News: Latest stable version of Bitcoin Core: 0.16.1  [Torrent]. (New!)
 
   Home   Help Search Donate Login Register  
Pages: [1]
  Print  
Author Topic: T9+ HashBoard Work for 20 min and go down  (Read 72 times)
Proclamer
Newbie
*
Offline Offline

Activity: 16
Merit: 1


View Profile
June 19, 2018, 07:49:11 PM
 #1

HI peapol; this time have a litel problem on my T9+.

this miner work ok for 20 min aprox and past this time (20 min aprox) go Down one of the Hashboards. 00000 GH/S(RT)

see the picture:

https://ibb.co/jz9gUd

de kernel log:

Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty ([email protected]) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000016] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000311] ps7-ttc #0 at df804000, irq=43
[    0.000617] Console: colour dummy device 80x30
[    0.000649] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090255] pid_max: default: 32768 minimum: 301
[    0.090478] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090497] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.092632] CPU: Testing write buffer coherency: ok
[    0.092969] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.093026] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[    0.093253] L310 cache controller enabled
[    0.093273] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.171038] CPU1: Booted secondary processor
[    0.260230] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260363] Brought up 2 CPUs
[    0.260382] SMP: Total of 2 processors activated.
[    0.260391] CPU: All CPU(s) started in SVC mode.
[    0.261067] devtmpfs: initialized
[    0.263475] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264684] regulator-dummy: no parameters
[    0.271913] NET: Registered protocol family 16
[    0.274205] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.276494] cpuidle: using governor ladder
[    0.276507] cpuidle: using governor menu
[    0.283909] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.285442] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.285456] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.285571] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.307463] bio: create slab <bio-0> at 0
[    0.308873] vgaarb: loaded
[    0.309584] SCSI subsystem initialized
[    0.311048] usbcore: registered new interface driver usbfs
[    0.311302] usbcore: registered new interface driver hub
[    0.311528] usbcore: registered new device driver usb
[    0.312046] media: Linux media interface: v0.10
[    0.312217] Linux video capture interface: v2.00
[    0.312456] pps_core: LinuxPPS API ver. 1 registered
[    0.312468] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.312589] PTP clock support registered
[    0.312940] EDAC MC: Ver: 3.0.0
[    0.313977] Advanced Linux Sound Architecture Driver Initialized.
[    0.316808] DMA-API: preallocated 4096 debug entries
[    0.316822] DMA-API: debugging enabled by kernel config
[    0.316899] Switched to clocksource arm_global_timer
[    0.337203] NET: Registered protocol family 2
[    0.338144] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.338202] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.338287] TCP: Hash tables configured (established 4096 bind 4096)
[    0.338333] TCP: reno registered
[    0.338350] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.338381] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.338621] NET: Registered protocol family 1
[    0.338977] RPC: Registered named UNIX socket transport module.
[    0.338989] RPC: Registered udp transport module.
[    0.338997] RPC: Registered tcp transport module.
[    0.339006] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.339019] PCI: CLS 0 bytes, default 64
[    0.339455] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.341466] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.343550] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.343733] msgmni has been set to 967
[    0.344513] io scheduler noop registered
[    0.344527] io scheduler deadline registered
[    0.344567] io scheduler cfq registered (default)
[    0.356468] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.356488] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.479676] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.047864] console [ttyPS0] enabled
[    1.052138] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.059785] [drm] Initialized drm 1.1.0 20060810
[    1.076709] brd: module loaded
[    1.086072] loop: module loaded
[    1.095518] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.101352] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.109269] libphy: XEMACPS mii bus: probed
[    1.113640] ------------- phy_id = 0x3625e62
[    1.118695] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.127553] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.134182] ehci-pci: EHCI PCI platform driver
[    1.141448] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.148281] usbcore: registered new interface driver usb-storage
[    1.155120] mousedev: PS/2 mouse device common for all mice
[    1.161247] i2c /dev entries driver
[    1.168218] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.173703] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.179630] Xilinx Zynq CpuIdle Driver started
[    1.184474] sdhci: Secure Digital Host Controller Interface driver
[    1.190686] sdhci: Copyright(c) Pierre Ossman
[    1.194954] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.201780] mmc0: no vqmmc regulator found
[    1.205790] mmc0: no vmmc regulator found
[    1.246915] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.255616] usbcore: registered new interface driver usbhid
[    1.261138] usbhid: USB HID core driver
[    1.265840] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.272136] nand: Micron MT29F2G08ABAEAWP
[    1.276106] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.282049] Bad block table found at page 131008, version 0x01
[    1.288297] Bad block table found at page 130944, version 0x01
[    1.294351] 3 ofpart partitions found on MTD device pl353-nand
[    1.300122] Creating 3 MTD partitions on "pl353-nand":
[    1.305227] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.313275] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.320606] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.329561] TCP: cubic registered
[    1.332796] NET: Registered protocol family 17
[    1.337515] Registering SWP/SWPB emulation handler
[    1.343396] regulator-dummy: disabling
[    1.347785] UBI: attaching mtd1 to ubi0
[    1.875480] UBI: scanning is finished
[    1.887135] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.894191] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.900988] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.907664] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.914501] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.920512] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.927623] UBI: max/mean erase counter: 19/11, WL threshold: 4096, image sequence number: 248547359
[    1.936723] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.945953] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.945960] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.962092] ALSA device list:
[    1.964974]   No soundcards found.
[    1.970243] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.999294] UBIFS: recovery needed
[    2.209245] UBIFS: recovery completed
[    2.212920] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.218863] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.227969] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.237858] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.242888] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D5E65D66-FDFF-460C-B3DB-A1F2DEB908D8, small LPT model
[    2.254193] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.261386] devtmpfs: mounted
[    2.264492] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    3.108076] random: dd urandom read with 0 bits of entropy available
[    3.496934]
[    3.496934] bcm54xx_config_init
[    4.106930]
[    4.106930] bcm54xx_config_init
[   30.630546] In axi fpga driver!
[   30.633613] request_mem_region OK!
[   30.637036] AXI fpga dev virtual address is 0xdf9fc000
[   30.642112] *base_vir_addr = 0xc510
[   30.657342] In fpga mem driver!
[   30.660409] request_mem_region OK!
[   30.663972] fpga mem virtual address is 0xe2000000
[   38.107895] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   38.113985] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   39.556919]
[   39.556919] bcm54xx_config_init
[   40.186923]
[   40.186923] bcm54xx_config_init
[   44.187794] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   44.193809] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  469.387257] random: nonblocking pool is initialized
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=8000c510
miner ID : 8104842e2420881c
Miner Type = T9+
AsicType = 1387
real AsicNum = 18
use critical mode to search freq...
get PLUG ON=0x07003f0e
Find hashboard on Chain[1]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
Find hashboard on Chain[8]
Find hashboard on Chain[9]
Find hashboard on Chain[10]
Find hashboard on Chain[11]
Find hashboard on Chain[12]
Find hashboard on Chain[13]
set_reset_allhashboard = 0x0000ffff
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x90
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x90
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[1] has freq in PIC and will jump over...
Chain[1] has core num in PIC
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x11 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[2] has freq in PIC and will jump over...
Chain[2] has core num in PIC
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[3] has freq in PIC and will jump over...
Chain[3] has core num in PIC
has freq in PIC, will disable freq setting.
chain[8] has freq in PIC and will jump over...
Chain[8] has core num in PIC
has freq in PIC, will disable freq setting.
chain[9] has freq in PIC and will jump over...
Chain[9] has core num in PIC
has freq in PIC, will disable freq setting.
chain[10] has freq in PIC and will jump over...
Chain[10] has core num in PIC
has freq in PIC, will disable freq setting.
chain[11] has freq in PIC and will jump over...
Chain[11] has core num in PIC
Chain[11] ASIC[6] has core num=1
Chain[11] ASIC[7] has core num=1
has freq in PIC, will disable freq setting.
chain[12] has freq in PIC and will jump over...
Chain[12] has core num in PIC
has freq in PIC, will disable freq setting.
chain[13] has freq in PIC and will jump over...
Chain[13] has core num in PIC
get PIC voltage=11 on chain[1], value=870
get PIC voltage=11 on chain[2], value=870
get PIC voltage=11 on chain[3], value=870
get PIC voltage=11 on chain[8], value=870
get PIC voltage=11 on chain[9], value=870
get PIC voltage=11 on chain[10], value=870
get PIC voltage=11 on chain[11], value=870
get PIC voltage=11 on chain[12], value=870
get PIC voltage=11 on chain[13], value=870
set_reset_allhashboard = 0x00000000
chain[8] temp offset record: 1,3,0,0,0,0,33,28
chain[8] temp chip I2C addr=0x98
chain[10] temp offset record: 1,1,0,0,0,0,33,28
chain[10] temp chip I2C addr=0x98
chain[12] temp offset record: 1,4,0,0,0,0,33,28
chain[12] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 9, total chain num = 9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1416 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = T9+
Miner compile time: Fri Nov 17 18:17:49 CST 2017 type: Antminer T9+set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8104842e2420881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[5] speed=5880
get fan[2] speed=5640
get fan[5] speed=5880
get fan[2] speed=5640
get fan[5] speed=5880
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x90
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J2] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J2] test patten OK temp=-1
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x90
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x11 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J3] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J3] test patten OK temp=-1
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J4] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J4] test patten OK temp=-1
Chain[J9] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J9] test patten OK temp=-1
Chain[J10] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J10] test patten OK temp=-1
Chain[J11] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J11] test patten OK temp=-1
Chain[J12] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J12] test patten OK temp=-1
Chain[J13] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J13] test patten OK temp=-1
Chain[J14] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J14] test patten OK temp=-1
Chain[J2] will use voltage=930 [1] to open core
Chain[J3] will use voltage=930 [1] to open core
Chain[J4] will use voltage=930 [1] to open core
Chain[J9] will use voltage=930 [1] to open core
Chain[J10] will use voltage=930 [1] to open core
Chain[J11] will use voltage=930 [1] to open core
Chain[J12] will use voltage=930 [1] to open core
Chain[J13] will use voltage=930 [1] to open core
Chain[J14] will use voltage=930 [1] to open core
Chain[J2] orignal chain_voltage_pic=11 value=870
Chain[J3] orignal chain_voltage_pic=11 value=870
Chain[J4] orignal chain_voltage_pic=11 value=870
Chain[J9] orignal chain_voltage_pic=1 value=930
Chain[J9] will use backup chain_voltage_pic=870 [11]
Chain[J9] get working chain_voltage_pic=11
Chain[J10] orignal chain_voltage_pic=1 value=930
Chain[J10] will use backup chain_voltage_pic=870 [11]
Chain[J10] get working chain_voltage_pic=11
Chain[J11] orignal chain_voltage_pic=1 value=930
Chain[J11] will use backup chain_voltage_pic=870 [11]
Chain[J11] get working chain_voltage_pic=11
Chain[J12] orignal chain_voltage_pic=1 value=930
Chain[J12] will use backup chain_voltage_pic=870 [11]
Chain[J12] get working chain_voltage_pic=11
Chain[J13] orignal chain_voltage_pic=1 value=930
Chain[J13] will use backup chain_voltage_pic=870 [11]
Chain[J13] get working chain_voltage_pic=11
Chain[J14] orignal chain_voltage_pic=1 value=930
Chain[J14] will use backup chain_voltage_pic=870 [11]
Chain[J14] get working chain_voltage_pic=11
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 1 time
Chain[J2] has 18 asic
Chain[J3] has 18 asic
Chain[J4] has 18 asic
Chain[J9] has 18 asic
Chain[J10] has 18 asic
Chain[J11] has 18 asic
Chain[J12] has 18 asic
Chain[J13] has 18 asic
Chain[J14] has 18 asic
Chain[J2] has core num in PIC
Chain[J3] has core num in PIC
Chain[J4] has core num in PIC
Chain[J9] has core num in PIC
Chain[J10] has core num in PIC
Chain[J11] has core num in PIC
Chain[J12] has core num in PIC
Chain[J12] ASIC[6] has core num=1
Chain[J12] ASIC[7] has core num=1
Chain[J13] has core num in PIC
Chain[J14] has core num in PIC
miner total rate=10617GH/s fixed rate=10500GH/s
read PIC voltage=930 on chain[1]
Chain:1 chipnum=18
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:1 max freq=575
Chain:1 min freq=575

read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:2 max freq=575
Chain:2 min freq=575

read PIC voltage=930 on chain[3]
Chain:3 chipnum=18
Chain[J4] voltage added=0.0V
Chain:3 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:3 max freq=575
Chain:3 min freq=575

read PIC voltage=930 on chain[8]
Chain:8 chipnum=18
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:8 max freq=575
Chain:8 min freq=575

read PIC voltage=930 on chain[9]
Chain:9 chipnum=18
Chain[J10] voltage added=0.0V
Chain:9 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:9 max freq=575
Chain:9 min freq=575

read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:10 max freq=575
Chain:10 min freq=575

read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:11 max freq=575
Chain:11 min freq=575

read PIC voltage=930 on chain[12]
Chain:12 chipnum=18
Chain[J13] voltage added=0.0V
Chain:12 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:12 max freq=575
Chain:12 min freq=575

read PIC voltage=930 on chain[13]
Chain:13 chipnum=18
Chain[J14] voltage added=0.0V
Chain:13 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:13 max freq=575
Chain:13 min freq=575


Miner fix freq ...
read PIC voltage=930 on chain[1]
Chain:1 chipnum=18
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:1 max freq=575
Chain:1 min freq=575

read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:2 max freq=575
Chain:2 min freq=575

read PIC voltage=930 on chain[3]
Chain:3 chipnum=18
Chain[J4] voltage added=0.0V
Chain:3 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:3 max freq=575
Chain:3 min freq=575

read PIC voltage=930 on chain[8]
Chain:8 chipnum=18
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:8 max freq=575
Chain:8 min freq=575

read PIC voltage=930 on chain[9]
Chain:9 chipnum=18
Chain[J10] voltage added=0.0V
Chain:9 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:9 max freq=575
Chain:9 min freq=575

read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:10 max freq=575
Chain:10 min freq=575

read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:11 max freq=575
Chain:11 min freq=575

read PIC voltage=930 on chain[12]
Chain:12 chipnum=18
Chain[J13] voltage added=0.0V
Chain:12 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:12 max freq=575
Chain:12 min freq=575

read PIC voltage=930 on chain[13]
Chain:13 chipnum=18
Chain[J14] voltage added=0.0V
Chain:13 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:13 max freq=575
Chain:13 min freq=575

max freq = 575
set baud=1
Chain[J9] PIC temp offset=1,3,0,0,0,0,33,28
chain[8] temp chip I2C addr=0x98
Chain[J9] chip[0] use PIC middle temp offset=3 typeID=41
New offset Chain[8] chip[0] local:33 remote:26 offset:37
Chain[J9] chip[0] get middle temp offset=37 typeID=41
Chain[J11] PIC temp offset=1,1,0,0,0,0,33,28
chain[10] temp chip I2C addr=0x98
Chain[J11] chip[0] use PIC middle temp offset=1 typeID=41
New offset Chain[10] chip[0] local:33 remote:30 offset:33
Chain[J11] chip[0] get middle temp offset=33 typeID=41
Chain[J13] PIC temp offset=1,4,0,0,0,0,33,28
chain[12] temp chip I2C addr=0x98
Chain[J13] chip[0] use PIC middle temp offset=4 typeID=41
New offset Chain[12] chip[0] local:32 remote:26 offset:36
Chain[J13] chip[0] get middle temp offset=36 typeID=41
single board rate=1179 voltage limit=870 on chain[1]
get PIC voltage=870 on chain[1], check: must be < 870
single board rate=1179 voltage limit=870 on chain[2]
get PIC voltage=870 on chain[2], check: must be < 870
single board rate=1179 voltage limit=870 on chain[3]
get PIC voltage=870 on chain[3], check: must be < 870
single board rate=1179 voltage limit=870 on chain[8]
get PIC voltage=870 on chain[8], check: must be < 870
single board rate=1179 voltage limit=870 on chain[9]
get PIC voltage=870 on chain[9], check: must be < 870
single board rate=1179 voltage limit=870 on chain[10]
get PIC voltage=870 on chain[10], check: must be < 870
single board rate=1178 voltage limit=870 on chain[11]
get PIC voltage=870 on chain[11], check: must be < 870
single board rate=1179 voltage limit=870 on chain[12]
get PIC voltage=870 on chain[12], check: must be < 870
single board rate=1179 voltage limit=870 on chain[13]
get PIC voltage=870 on chain[13], check: must be < 870
open core on chain[1] [8] [9]...
set voltage=870 on chain[1], the real voltage=870
Chain[J2] set working voltage=870 [11]
open core on chain[2] [10] [11]...
set voltage=870 on chain[2], the real voltage=870
Chain[J3] set working voltage=870 [11]
open core on chain[3] [12] [13]...
set voltage=870 on chain[3], the real voltage=870
Chain[J4] set working voltage=870 [11]
do heat board 8xPatten for 1 times
start send works on chain[1]
start send works on chain[2]
start send works on chain[3]
start send works on chain[8]
start send works on chain[9]
start send works on chain[10]
start send works on chain[11]
start send works on chain[12]
start send works on chain[13]
get send work num :16416 on Chain[1]
get send work num :16416 on Chain[2]
get send work num :16416 on Chain[3]
get send work num :16416 on Chain[8]
get send work num :16416 on Chain[9]
get send work num :16416 on Chain[10]
get send work num :16416 on Chain[11]
get send work num :16416 on Chain[12]
get send work num :16416 on Chain[13]
wait recv nonce on chain[1]
wait recv nonce on chain[2]
wait recv nonce on chain[3]
wait recv nonce on chain[8]
wait recv nonce on chain[9]
wait recv nonce on chain[10]
wait recv nonce on chain[11]
wait recv nonce on chain[12]
wait recv nonce on chain[13]
get nonces on chain[1]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575

total valid nonce number:16416
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:1979
last_nonce_num:94
get nonces on chain[2]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575

total valid nonce number:16416
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:1979
last_nonce_num:89
get nonces on chain[3]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575

total valid nonce number:16416
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:1979
last_nonce_num:99
get nonces on chain[8]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575

total valid nonce number:16416
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:2025
last_nonce_num:170
get nonces on chain[9]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575

total valid nonce number:16416
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:1979
last_nonce_num:88
get nonces on chain[10]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575

total valid nonce number:16416
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:1979
last_nonce_num:91
get nonces on chain[11]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575

total valid nonce number:16416
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:1979
last_nonce_num:88
get nonces on chain[12]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575

total valid nonce number:16416
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:1979
last_nonce_num:89
get nonces on chain[13]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575

total valid nonce number:16416
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:1979
last_nonce_num:97
chain[1]: All chip cores are opened OK!
Test Patten on chain[1]: OK!
chain[2]: All chip cores are opened OK!
Test Patten on chain[2]: OK!
chain[3]: All chip cores are opened OK!
Test Patten on chain[3]: OK!
chain[8]: All chip cores are opened OK!
Test Patten on chain[8]: OK!
chain[9]: All chip cores are opened OK!
Test Patten on chain[9]: OK!
chain[10]: All chip cores are opened OK!
Test Patten on chain[10]: OK!
chain[11]: All chip cores are opened OK!
Test Patten on chain[11]: OK!
chain[12]: All chip cores are opened OK!
Test Patten on chain[12]: OK!
chain[13]: All chip cores are opened OK!
Test Patten on chain[13]: OK!
setStartTimePoint total_tv_start_sys=171 total_tv_end_sys=172
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[1]: (asic index start from 1-18)
Asic[01]=73.8190 Asic[02]=66.6050 Asic[03]=71.8730 Asic[04]=65.5150 Asic[05]=70.3300 Asic[06]=64.9440 Asic[07]=62.1090 Asic[08]=60.5150
Asic[09]=61.0690 Asic[10]=62.5620 Asic[11]=65.1790 Asic[12]=58.6860 Asic[13]=65.1290 Asic[14]=66.5380 Asic[15]=65.9680 Asic[16]=71.1010
Asic[17]=65.8330 Asic[18]=64.1390

get RT hashrate from Chain[2]: (asic index start from 1-18)
Asic[01]=64.4910 Asic[02]=68.2320 Asic[03]=64.8270 Asic[04]=66.9910 Asic[05]=63.2660 Asic[06]=63.2160 Asic[07]=70.8660 Asic[08]=64.0550
Asic[09]=61.0350 Asic[10]=65.8330 Asic[11]=60.9180 Asic[12]=67.6960 Asic[13]=66.3530 Asic[14]=66.3370 Asic[15]=63.0320 Asic[16]=64.7600
Asic[17]=62.5620 Asic[18]=61.9580

get RT hashrate from Chain[3]: (asic index start from 1-18)

get RT hashrate from Chain[8]: (asic index start from 1-18)
Asic[01]=64.0210 Asic[02]=58.9380 Asic[03]=61.2870 Asic[04]=64.7260 Asic[05]=64.9780 Asic[06]=66.2700 Asic[07]=70.1450 Asic[08]=58.9040
Asic[09]=62.4950 Asic[10]=63.6520 Asic[11]=70.2620 Asic[12]=65.0110 Asic[13]=66.8570 Asic[14]=72.0240 Asic[15]=60.4980 Asic[16]=66.2190
Asic[17]=66.1190 Asic[18]=60.7160

get RT hashrate from Chain[9]: (asic index start from 1-18)
Asic[01]=68.1650 Asic[02]=63.8870 Asic[03]=66.8570 Asic[04]=67.4940 Asic[05]=64.6420 Asic[06]=64.4580 Asic[07]=66.4040 Asic[08]=65.3470
Asic[09]=61.7230 Asic[10]=67.6620 Asic[11]=63.3000 Asic[12]=66.5880 Asic[13]=66.9570 Asic[14]=63.0820 Asic[15]=58.8880 Asic[16]=65.5980
Asic[17]=66.8900 Asic[18]=62.3770

get RT hashrate from Chain[10]: (asic index start from 1-18)
Asic[01]=68.7360 Asic[02]=64.4910 Asic[03]=64.8430 Asic[04]=64.3400 Asic[05]=68.2320 Asic[06]=64.3070 Asic[07]=67.1920 Asic[08]=63.5010
Asic[09]=63.4340 Asic[10]=62.8130 Asic[11]=64.4410 Asic[12]=65.8670 Asic[13]=60.4650 Asic[14]=61.7900 Asic[15]=64.3570 Asic[16]=65.7490
Asic[17]=63.4010 Asic[18]=64.6090

get RT hashrate from Chain[11]: (asic index start from 1-18)
Asic[01]=63.5680 Asic[02]=69.0710 Asic[03]=66.5040 Asic[04]=64.3230 Asic[05]=69.4740 Asic[06]=65.0450 Asic[07]=64.6090 Asic[08]=67.1420
Asic[09]=62.2260 Asic[10]=64.9610 Asic[11]=60.0280 Asic[12]=68.0140 Asic[13]=67.5110 Asic[14]=66.5710 Asic[15]=66.4880 Asic[16]=61.7230
Asic[17]=65.6660 Asic[18]=64.1560

get RT hashrate from Chain[12]: (asic index start from 1-18)

get RT hashrate from Chain[13]: (asic index start from 1-18)
Check Chain[J2] ASIC RT error: (asic index start from 1-18)
Check Chain[J3] ASIC RT error: (asic index start from 1-18)
Check Chain[J4] ASIC RT error: (asic index start from 1-18)
Check Chain[J9] ASIC RT error: (asic index start from 1-18)
Check Chain[J10] ASIC RT error: (asic index start from 1-18)
Check Chain[J11] ASIC RT error: (asic index start from 1-18)
Check Chain[J12] ASIC RT error: (asic index start from 1-18)
Check Chain[J13] ASIC RT error: (asic index start from 1-18)
Check Chain[J14] ASIC RT error: (asic index start from 1-18)
Done check_asic_reg
do read temp on Chain[8]
Chain[8] Chip[1] TempTypeID=41 middle offset=37
Chain[8] Chip[1] local Temp=66
Chain[8] Chip[1] middle Temp=93
Special fix Chain[8] Chip[1] middle Temp = 81
Done read temp on Chain[8]
do read temp on Chain[10]
Chain[10] Chip[1] TempTypeID=41 middle offset=33
Chain[10] Chip[1] local Temp=67
Chain[10] Chip[1] middle Temp=80
Special fix Chain[10] Chip[1] middle Temp = 82
Done read temp on Chain[10]
do read temp on Chain[12]
Chain[12] Chip[1] TempTypeID=41 middle offset=36
read failed, old value: Chain[12] Chip[1] local Temp=72
read failed on Chain[12] Chip[1] middle Temp old value:87
Special fix Chain[12] Chip[1] middle Temp = 87
Done read temp on Chain[12]
Set fixed fan speed=100
FAN PWM: 100
read_temp_func Done!
CRC error counter=16
1532198188
Hero Member
*
Offline Offline

Posts: 1532198188

View Profile Personal Message (Offline)

Ignore
1532198188
Reply with quote  #2

1532198188
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1532198188
Hero Member
*
Offline Offline

Posts: 1532198188

View Profile Personal Message (Offline)

Ignore
1532198188
Reply with quote  #2

1532198188
Report to moderator
BitMaxz
Legendary
*
Offline Offline

Activity: 1134
Merit: 1026

Bitmain miners is getting worst.


View Profile
June 19, 2018, 09:29:12 PM
 #2

Look at this line

Code:
Chain[8] Chip[1] TempTypeID=41 middle offset=37
Chain[8] Chip[1] local Temp=66
Chain[8] Chip[1] middle Temp=93
Special fix Chain[8] Chip[1] middle Temp = 81
Done read temp on Chain[8]
do read temp on Chain[10]
Chain[10] Chip[1] TempTypeID=41 middle offset=33
Chain[10] Chip[1] local Temp=67
Chain[10] Chip[1] middle Temp=80
Special fix Chain[10] Chip[1] middle Temp = 82
Done read temp on Chain[10]

It looks like it reach the high temp protection that is why your miners hashrate is down or stop you must add more cooling devices in your room or you can try to change the fan speed to maximum speed.
You can follow the guide here https://bitcointalk.to/index.php?topic=2690140.0 but first do a reset it to factory default here's the guide https://enforum.bitmain.com/bbs/topics/3957

Let me know if it's still persist.

OgNasty
Donator
Legendary
*
Offline Offline

Activity: 2618
Merit: 1288


Disclaimer: Author Long BTC


View Profile WWW
June 26, 2018, 07:29:16 PM
Merited by BitMaxz (2)
 #3

Look at this line

Code:
Chain[8] Chip[1] TempTypeID=41 middle offset=37
Chain[8] Chip[1] local Temp=66
Chain[8] Chip[1] middle Temp=93
Special fix Chain[8] Chip[1] middle Temp = 81
Done read temp on Chain[8]
do read temp on Chain[10]
Chain[10] Chip[1] TempTypeID=41 middle offset=33
Chain[10] Chip[1] local Temp=67
Chain[10] Chip[1] middle Temp=80
Special fix Chain[10] Chip[1] middle Temp = 82
Done read temp on Chain[10]

It looks like it reach the high temp protection that is why your miners hashrate is down or stop you must add more cooling devices in your room or you can try to change the fan speed to maximum speed.
You can follow the guide here https://bitcointalk.to/index.php?topic=2690140.0 but first do a reset it to factory default here's the guide https://enforum.bitmain.com/bbs/topics/3957

Let me know if it's still persist.

While increasing fan speed would be helpful, I don't think adding cooling devices is necessarily good advice.  Rather than trying to cool the room down, try to exhaust the heat outside the room, so that you are removing heat as opposed to cooling it.

Proclamer
Newbie
*
Offline Offline

Activity: 16
Merit: 1


View Profile
June 27, 2018, 05:31:48 PM
 #4

While increasing fan speed would be helpful, I don't think adding cooling devices is necessarily good advice.  Rather than trying to cool the room down, try to exhaust the heat outside the room, so that you are removing heat as opposed to cooling it.

Thx i think this is better idea!

my room is this actually!!!

https://ibb.co/dpSmC8

https://ibb.co/iGq6C8

dont have exhaust fan is completely closed. is recommended install a exhaust fan?
BitMaxz
Legendary
*
Offline Offline

Activity: 1134
Merit: 1026

Bitmain miners is getting worst.


View Profile
June 27, 2018, 05:58:55 PM
 #5

Great setup and I think you don't need to add exhaust fan to take hot air out.
Let me know what is your temp right now with this setup? and let me ask about your weather temperature in your place?

If your setup still gives you 80 degrees above try to add more fan(air flow or electric fan) make sure your miner is not very close to each other. If still exceeding 80 degrees my guess your hashboard heatsink is not glued properly.

Pages: [1]
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!