Bitcoin Forum
October 17, 2018, 02:30:42 PM *
News: Make sure you are not using versions of Bitcoin Core other than 0.17.0 [Torrent], 0.16.3, 0.15.2, or 0.14.3. More info.
 
   Home   Help Search Donate Login Register  
Pages: [1]
  Print  
Author Topic: bmminer not found and fatal fan error but replacing fan wont work?  (Read 61 times)
baboon1234
Newbie
*
Offline Offline

Activity: 14
Merit: 0


View Profile
May 05, 2018, 02:47:33 PM
 #1

Hey guys!

Yesterday I got my first antminer s9 from ebay and it's been a nightmare lol.
Not going into further detail I guess I just get straight to the point.


I turned it on - one or two boards were at temp 15 at 0 hashrate.
Turned it off - put cable out & in - working properly for 2 hrs

Next morning same problem. Some boards didnt show and i had it working for a short period of time.
I noticed the intake fan stopped working and I'm getting a fatal fan error (get fan speed 5160 loop and then fatal error // before that "bmminer not found"

Today i was trying with a replacement fan from a friend and got the same Issue - intake fan isnt working.
then we tried switching pins from intake and exhaust fan - still intake fan not working?Huh this is where im really lost and it doesnt make too much sense to me.

How can it be, that after replacing the fan with a new one (ruling out that it's an issue with the fan.. or we got really unlucky and had 2 broken fans I guess?!)
AND then switching the input from PCB to broken fan with the working fan pcb connection that it's still the exhaust fan which is not working?

I'm really confused!

Anyone any idea?

Oh, and further then that im trying to get the latest firmware from https://shop.bitmain.com/support.htm?pid=00720161126080548570Q2tDBXAH065D but I cant download it? It seems like the server isnt working. Is there any way to get older firmware maybe? (or at least the newest one .. I heard the Nov 17 Firmware is a little buggy)

Thanks guys. Would really appreciate any information.

edit: did update (again) to newest firmware. still same problem
cryptobet.to
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1539786642
Hero Member
*
Offline Offline

Posts: 1539786642

View Profile Personal Message (Offline)

Ignore
1539786642
Reply with quote  #2

1539786642
Report to moderator
1539786642
Hero Member
*
Offline Offline

Posts: 1539786642

View Profile Personal Message (Offline)

Ignore
1539786642
Reply with quote  #2

1539786642
Report to moderator
baboon1234
Newbie
*
Offline Offline

Activity: 14
Merit: 0


View Profile
May 05, 2018, 03:20:59 PM
 #2

Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty ([email protected]) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:

    0
    1

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]    Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000309] ps7-ttc #0 at df804000, irq=43
[    0.000623] Console: colour dummy device 80x30
[    0.000655] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040211] pid_max: default: 32768 minimum: 301
[    0.040437] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040457] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042630] CPU: Testing write buffer coherency: ok
[    0.042983] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043046] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[    0.043269] L310 cache controller enabled
[    0.043289] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121040] CPU1: Booted secondary processor
[    0.210230] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210364] Brought up 2 CPUs
[    0.210384] SMP: Total of 2 processors activated.
[    0.210392] CPU: All CPU(s) started in SVC mode.
[    0.211067] devtmpfs: initialized
[    0.213492] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214745] regulator-dummy: no parameters
[    0.223746] NET: Registered protocol family 16
[    0.226013] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.228344] cpuidle: using governor ladder
[    0.228358] cpuidle: using governor menu
[    0.235915] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.237455] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.237469] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.237591] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.259677] bio: create slab <bio-0> at 0
[    0.261421] vgaarb: loaded
[    0.262146] SCSI subsystem initialized
[    0.263044] usbcore: registered new interface driver usbfs
[    0.263217] usbcore: registered new interface driver hub
[    0.263448] usbcore: registered new device driver usb
[    0.263976] media: Linux media interface: v0.10
[    0.264137] Linux video capture interface: v2.00
[    0.264389] pps_core: LinuxPPS API ver. 1 registered
[    0.264401] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.264532] PTP clock support registered
[    0.264902] EDAC MC: Ver: 3.0.0
[    0.265972] Advanced Linux Sound Architecture Driver Initialized.
[    0.269004] DMA-API: preallocated 4096 debug entries
[    0.269018] DMA-API: debugging enabled by kernel config
[    0.269104] Switched to clocksource arm_global_timer
[    0.290586] NET: Registered protocol family 2
[    0.291275] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.291332] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.291417] TCP: Hash tables configured (established 4096 bind 4096)
[    0.291467] TCP: reno registered
[    0.291484] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.291522] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.291775] NET: Registered protocol family 1
[    0.292134] RPC: Registered named UNIX socket transport module.
[    0.292147] RPC: Registered udp transport module.
[    0.292155] RPC: Registered tcp transport module.
[    0.292163] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.292177] PCI: CLS 0 bytes, default 64
[    0.292644] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.294714] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.296843] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.297037] msgmni has been set to 967
[    0.297840] io scheduler noop registered
[    0.297854] io scheduler deadline registered
[    0.297896] io scheduler cfq registered (default)
[    0.310360] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.310380] dma-pl330 f8003000.ps7-dma:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.434911] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.002826] console [ttyPS0] enabled
[    1.007126] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.014797] [drm] Initialized drm 1.1.0 20060810
[    1.032066] brd: module loaded
[    1.041535] loop: module loaded
[    1.051400] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.057149] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.065333] libphy: XEMACPS mii bus: probed
[    1.069880] ------------- phy_id = 0x3625e62
[    1.074630] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.083281] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.089947] ehci-pci: EHCI PCI platform driver
[    1.097172] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.104006] usbcore: registered new interface driver usb-storage
[    1.110888] mousedev: PS/2 mouse device common for all mice
[    1.116979] i2c /dev entries driver
[    1.123955] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.129554] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.135440] Xilinx Zynq CpuIdle Driver started
[    1.140321] sdhci: Secure Digital Host Controller Interface driver
[    1.146414] sdhci: Copyright(c) Pierre Ossman
[    1.150826] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.157556] mmc0: no vqmmc regulator found
[    1.161603] mmc0: no vmmc regulator found
[    1.199126] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.207835] usbcore: registered new interface driver usbhid
[    1.213349] usbhid: USB HID core driver
[    1.218087] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.224385] nand: Micron MT29F2G08ABAEAWP
[    1.228348] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.234289] Bad block table found at page 131008, version 0x01
[    1.240518] Bad block table found at page 130944, version 0x01
[    1.246567] 3 ofpart partitions found on MTD device pl353-nand
[    1.252349] Creating 3 MTD partitions on "pl353-nand":
[    1.257444] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.265535] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.272869] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.281891] TCP: cubic registered
[    1.285126] NET: Registered protocol family 17
[    1.289858] Registering SWP/SWPB emulation handler
[    1.295777] regulator-dummy: disabling
[    1.300198] UBI: attaching mtd1 to ubi0
[    1.826211] UBI: scanning is finished
[    1.837943] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.845028] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.851790] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.858454] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.865332] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.871312] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.878420] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1134783803
[    1.887463] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.896680] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.896685] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.900763] ALSA device list:
[    1.900767]   No soundcards found.
[    1.917147] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.946354] UBIFS: recovery needed
[    2.024148] UBIFS: recovery completed
[    2.027818] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.033798] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.042874] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.052759] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.057788] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[    2.069087] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.076280] devtmpfs: mounted
[    2.079405] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.920815] random: dd urandom read with 0 bits of entropy available
[    3.319125]
[    3.319125] bcm54xx_config_init
[    3.929142]
[    3.929142] bcm54xx_config_init
[    7.929971] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    7.936080] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   25.417436] In axi fpga driver!
[   25.420536] request_mem_region OK!
[   25.423900] AXI fpga dev virtual address is 0xdf9fc000
[   25.429006] *base_vir_addr = 0x8c510
[   25.444171] In fpga mem driver!
[   25.447243] request_mem_region OK!
[   25.450856] fpga mem virtual address is 0xe2000000
[   26.239135]
[   26.239135] bcm54xx_config_init
[   26.869157]
[   26.869157] bcm54xx_config_init
[   30.869983] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   30.876088] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 802c4c8415408814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[26] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[15] has core num=15
Chain[6] ASIC[16] has core num=1
Chain[6] ASIC[34] has core num=2
Chain[6] ASIC[37] has core num=1
Chain[6] ASIC[45] has core num=1
Chain[6] ASIC[55] has core num=2
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Check chain[7] PIC fw version=0x03
get PIC voltage=91 on chain[5], value=890
get PIC voltage=91 on chain[6], value=890
get PIC voltage=91 on chain[7], value=890
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,37,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,37,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,37,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1516 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 802c4c8415408814
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
Fatal Error: some Fan lost or Fan speed low!
tim-bc
Member
**
Offline Offline

Activity: 196
Merit: 49


View Profile
May 05, 2018, 03:38:05 PM
 #3

The bmminer not found message is normal if you only see it once or a couple of times. When you say you put the latest firmware do you mean the Antminer-S9-all-201704270135-autofreq-user-Update2UBI-NF.tar.gz?

https://s3.cn-north-1.amazonaws.com.cn/shop-bitmain/download/Antminer-S9-all-201704270135-autofreq-user-Update2UBI-NF.tar.gz
https://www.dropbox.com/s/v5r5n46eajetme4/Antminer-S9-all-201704270135-autofreq-user-Update2UBI-NF.tar.gz?dl=0
https://www.mediafire.com/file/986jp6m02svz7ya/Antminer-S9-all-201704270135-autofreq-user-Update2UBI-NF.tar.gz
https://1drv.ms/u/s!AtkfLUFCwpoBaWvM7d0-19mvBYo

Confirm sha1sum is 0515029015ad8dcedb185367fc5f829851dc65ed before flashing.

You mentioned that the issue is with the front fan, which you replaced. When you say you switched them around on the pins, was it still the intake fan with the problem? You could always try unplugging one fan at a time and then trying both pins for each fan to narrow things down.

Ignore scammers on Skype, Telegram, etc. I will only ever contact you via forum PMs. See profile for fingerprint.
NotFuzzyWarm
Legendary
*
Offline Offline

Activity: 1596
Merit: 1117


Evil beware: We have waffles!


View Profile
May 05, 2018, 04:34:16 PM
 #4

<massive text wall snip>

Dude! Learn to use the code tag which looks like #
That wall then becomes

Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty ([email protected]) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:

    0
    1

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]    Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000309] ps7-ttc #0 at df804000, irq=43
[    0.000623] Console: colour dummy device 80x30
[    0.000655] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040211] pid_max: default: 32768 minimum: 301
[    0.040437] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040457] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042630] CPU: Testing write buffer coherency: ok
[    0.042983] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043046] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[    0.043269] L310 cache controller enabled
[    0.043289] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121040] CPU1: Booted secondary processor
[    0.210230] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210364] Brought up 2 CPUs
[    0.210384] SMP: Total of 2 processors activated.
[    0.210392] CPU: All CPU(s) started in SVC mode.
[    0.211067] devtmpfs: initialized
[    0.213492] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214745] regulator-dummy: no parameters
[    0.223746] NET: Registered protocol family 16
[    0.226013] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.228344] cpuidle: using governor ladder
[    0.228358] cpuidle: using governor menu
[    0.235915] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.237455] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.237469] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.237591] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.259677] bio: create slab <bio-0> at 0
[    0.261421] vgaarb: loaded
[    0.262146] SCSI subsystem initialized
[    0.263044] usbcore: registered new interface driver usbfs
[    0.263217] usbcore: registered new interface driver hub
[    0.263448] usbcore: registered new device driver usb
[    0.263976] media: Linux media interface: v0.10
[    0.264137] Linux video capture interface: v2.00
[    0.264389] pps_core: LinuxPPS API ver. 1 registered
[    0.264401] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.264532] PTP clock support registered
[    0.264902] EDAC MC: Ver: 3.0.0
[    0.265972] Advanced Linux Sound Architecture Driver Initialized.
[    0.269004] DMA-API: preallocated 4096 debug entries
[    0.269018] DMA-API: debugging enabled by kernel config
[    0.269104] Switched to clocksource arm_global_timer
[    0.290586] NET: Registered protocol family 2
[    0.291275] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.291332] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.291417] TCP: Hash tables configured (established 4096 bind 4096)
[    0.291467] TCP: reno registered
[    0.291484] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.291522] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.291775] NET: Registered protocol family 1
[    0.292134] RPC: Registered named UNIX socket transport module.
[    0.292147] RPC: Registered udp transport module.
[    0.292155] RPC: Registered tcp transport module.
[    0.292163] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.292177] PCI: CLS 0 bytes, default 64
[    0.292644] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.294714] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.296843] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.297037] msgmni has been set to 967
[    0.297840] io scheduler noop registered
[    0.297854] io scheduler deadline registered
[    0.297896] io scheduler cfq registered (default)
[    0.310360] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.310380] dma-pl330 f8003000.ps7-dma:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.434911] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.002826] console [ttyPS0] enabled
[    1.007126] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.014797] [drm] Initialized drm 1.1.0 20060810
[    1.032066] brd: module loaded
[    1.041535] loop: module loaded
[    1.051400] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.057149] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.065333] libphy: XEMACPS mii bus: probed
[    1.069880] ------------- phy_id = 0x3625e62
[    1.074630] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.083281] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.089947] ehci-pci: EHCI PCI platform driver
[    1.097172] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.104006] usbcore: registered new interface driver usb-storage
[    1.110888] mousedev: PS/2 mouse device common for all mice
[    1.116979] i2c /dev entries driver
[    1.123955] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.129554] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.135440] Xilinx Zynq CpuIdle Driver started
[    1.140321] sdhci: Secure Digital Host Controller Interface driver
[    1.146414] sdhci: Copyright(c) Pierre Ossman
[    1.150826] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.157556] mmc0: no vqmmc regulator found
[    1.161603] mmc0: no vmmc regulator found
[    1.199126] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.207835] usbcore: registered new interface driver usbhid
[    1.213349] usbhid: USB HID core driver
[    1.218087] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.224385] nand: Micron MT29F2G08ABAEAWP
[    1.228348] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.234289] Bad block table found at page 131008, version 0x01
[    1.240518] Bad block table found at page 130944, version 0x01
[    1.246567] 3 ofpart partitions found on MTD device pl353-nand
[    1.252349] Creating 3 MTD partitions on "pl353-nand":
[    1.257444] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.265535] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.272869] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.281891] TCP: cubic registered
[    1.285126] NET: Registered protocol family 17
[    1.289858] Registering SWP/SWPB emulation handler
[    1.295777] regulator-dummy: disabling
[    1.300198] UBI: attaching mtd1 to ubi0
[    1.826211] UBI: scanning is finished
[    1.837943] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.845028] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.851790] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.858454] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.865332] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.871312] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.878420] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1134783803
[    1.887463] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.896680] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.896685] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.900763] ALSA device list:
[    1.900767]   No soundcards found.
[    1.917147] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.946354] UBIFS: recovery needed
[    2.024148] UBIFS: recovery completed
[    2.027818] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.033798] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.042874] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.052759] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.057788] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[    2.069087] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.076280] devtmpfs: mounted
[    2.079405] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.920815] random: dd urandom read with 0 bits of entropy available
[    3.319125]
[    3.319125] bcm54xx_config_init
[    3.929142]
[    3.929142] bcm54xx_config_init
[    7.929971] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    7.936080] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   25.417436] In axi fpga driver!
[   25.420536] request_mem_region OK!
[   25.423900] AXI fpga dev virtual address is 0xdf9fc000
[   25.429006] *base_vir_addr = 0x8c510
[   25.444171] In fpga mem driver!
[   25.447243] request_mem_region OK!
[   25.450856] fpga mem virtual address is 0xe2000000
[   26.239135]
[   26.239135] bcm54xx_config_init
[   26.869157]
[   26.869157] bcm54xx_config_init
[   30.869983] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   30.876088] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 802c4c8415408814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[26] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[15] has core num=15
Chain[6] ASIC[16] has core num=1
Chain[6] ASIC[34] has core num=2
Chain[6] ASIC[37] has core num=1
Chain[6] ASIC[45] has core num=1
Chain[6] ASIC[55] has core num=2
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Check chain[7] PIC fw version=0x03
get PIC voltage=91 on chain[5], value=890
get PIC voltage=91 on chain[6], value=890
get PIC voltage=91 on chain[7], value=890
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,37,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,37,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,37,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1516 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 802c4c8415408814
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
get fan[2] speed=5160
Fatal Error: some Fan lost or Fan speed low!



Moderator's note: This post was edited by frodocooper to fix erroneous quote formatting.

For bitcoin to succeed the community must police itself - Joshua Zipkin aka Joshua Alexander leaked AMT A1 miner skype chats
How a miner mfgr SHOULD operate: HaggsFIN trip to Canaan My info useful? Donations welcome! 1Fuzzyk398kDWVjuC5qPX5v6CjSkvbgAbd
-Support Sidehacks miner development. Donations to:   1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
baboon1234
Newbie
*
Offline Offline

Activity: 14
Merit: 0


View Profile
May 05, 2018, 04:35:47 PM
 #5

hey man thank you very much for the help! appreciate it since i just try to figure out how to move on from here with my first antminer Cheesy

does flashing those firmwares mess up my warranty?

The issue with the fan is weird.
The intake fan wasnt working and we replaced it with a new one - still didnt work. We then switched the new (still not working intake) fan cable with the old (still working exhaust fan)
--> the exhaust fan  still worked // intake still didnt work .. makes no sense to me Cheesy

thanks guys. i might just have gotten a messed up miner from ebay. not sure.
I dont think i myself broke it by simply turning it on and off 3 times?! lol

<3 to everyone Cheesy

edit: learned to use code tag
NotFuzzyWarm
Legendary
*
Offline Offline

Activity: 1596
Merit: 1117


Evil beware: We have waffles!


View Profile
May 05, 2018, 04:42:19 PM
 #6

hey man thank you very much for the help! appreciate it since i just try to figure out how to move on from here with my first antminer Cheesy

does flashing those firmwares mess up my warranty?

The issue with the fan is weird.
The intake fan wasnt working and we replaced it with a new one - still didnt work. We then switched the new (still not working intake) fan cable with the old (still working exhaust fan)
--> the exhaust fan  still worked // intake still didnt work .. makes no sense to me Cheesy

thanks guys. i might just have gotten a messed up miner from ebay. not sure.
I dont think i myself broke it by simply turning it on and off 3 times?! lol

<3 to everyone Cheesy
Where did you get the fan from and is it the correct replacement? These are not regular PC case fans...
And have you now learned to never buy a  miner from ebay vs only buying direct from Bitmain or in the case of Canaan's Avalons, their Authorized distributors? A little thing called Factory Warranty is very nice.

For bitcoin to succeed the community must police itself - Joshua Zipkin aka Joshua Alexander leaked AMT A1 miner skype chats
How a miner mfgr SHOULD operate: HaggsFIN trip to Canaan My info useful? Donations welcome! 1Fuzzyk398kDWVjuC5qPX5v6CjSkvbgAbd
-Support Sidehacks miner development. Donations to:   1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
baboon1234
Newbie
*
Offline Offline

Activity: 14
Merit: 0


View Profile
May 05, 2018, 04:50:48 PM
 #7

yep it was correct. it was the original fan from bitmain.
and yes to the 2nd point too man. painful lesson but yeah
NotFuzzyWarm
Legendary
*
Offline Offline

Activity: 1596
Merit: 1117


Evil beware: We have waffles!


View Profile
May 05, 2018, 04:55:10 PM
 #8

At least you *are* learning though Wink Kudos for that! Too many come here just to piss and moan without learning anything from their experiences

For bitcoin to succeed the community must police itself - Joshua Zipkin aka Joshua Alexander leaked AMT A1 miner skype chats
How a miner mfgr SHOULD operate: HaggsFIN trip to Canaan My info useful? Donations welcome! 1Fuzzyk398kDWVjuC5qPX5v6CjSkvbgAbd
-Support Sidehacks miner development. Donations to:   1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
baboon1234
Newbie
*
Offline Offline

Activity: 14
Merit: 0


View Profile
May 05, 2018, 05:03:16 PM
 #9

nah man. learning a lot and those words are harsh but true.
guess i got reeeeeekt lol.

bitconneeeeeeect
(I'm filing my lawsuit) Cheesy
Pages: [1]
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!